Skyrise Shake Hip & Ridge Units are pre-manufactured, labor saving caps for hips and ridges. These products are made from the same red cedar resource as Certi-label™ shakes for a high quality, perfect match.

Skyrise Handsplit
Number 1 Grade
Manufactured from Number 1 Grade Skyrise shakes. Lengths 24-inch; thickness: ½" medium, ¾" heavy; widths not less than 9" (measured on the inner surface at the butt end). 20 units per bundle.

Skyrise Tapersawn
Number 1 Grade, Blue Label
Description
Manufactured from quality Number 1 Grade Skyrise shakes. Lengths 18-inch; 24-inch; thickness 5/8", ¾"; widths not less than 9" (measured on the inner surface at the butt end). 20 units per bundle.

Number 2 Grade, Red Label
Description
Manufactured from Number 2 Grade Skyrise shakes. Lengths 18-inch, 24-inch; thickness 5/8" or ¾"; widths not less than 9" (measured on the inner surface at the butt end). 20 units per bundle.

Exposures
The hip & ridge exposure should be equal to or less than the exposure in the field of the roof, and should not exceed the maximum exposure for the specified length and grade.

Recommended Use
The appropriate hip and ridge unit should be selected to match the adjacent shingles or shakes. However, in many areas a tapersawn hip and ridge units is used on both shingle and shake applications. Hip and ridge product type selection should be performed in accordance with the aesthetic look desired.

SKYRISE HANDSPLIT SHAKE HIP & RIDGE UNITS
Number 1 Grade
Description
Manufactured from Number 1 Grade Skyrise shakes. Lengths 24-inch; thickness ½" medium, ¾" heavy; widths not less than 9" (measured on the inner surface at the butt end). 20 units per bundle.

Machine Grooved Shakes
Machine Grooved Shakes are manufactured specifically for exterior and interior wall surface uses. They are a low maintenance product that adds beauty, texture, durability and insulating qualities to either new construction or remodeling and renovation of existing structures.

Appearance
Machine grooved for a shake texture from Number 1 Grade Blue Label Skyrise red cedar shingles, trimmed for parallel edges with butts sawn at right angles. Finishes: Natural, primed white, primed gray, or special order colors.

Lengths
16-inch, 18-inch and 24-inch.

Number 1 Grade, Blue Label
Description
Lengths 16-inch, 18-inch, 24-inch; width 4" minimum; thickness of 16-inch is 5/2" ( 5 butts together measures 2' thick), 18-inch is 5/2 -¼" thick, 24-inch is 4/2" thick. Clear heartwood: 100% edge grain; no defects.

Recommended Use
For exterior and interior walls where a premium quality product is desired.